SYMPL Core Sp
By default, the SYMPL Core Sp is configured with the static IP address 192.168.123.100 and has its DHCP server enabled. Connected SYMPL Nodes with DHCP Client activated are automatically assigned IP addresses from the 192.168.123.1 to 192.168.123.254 range, excluding the controller's own IP address (192.168.123.100).SYMPL Fusion
On the SYMPL Fusion, the Ethernet bridge must be disabled before a DHCP server can be configured.
To do this, set eth1 to DHCP Client and click Apply. Then power-cycle the SYMPL Fusion.
After approximately 60 seconds, the WebUI should be accessible at the default IP address 192.168.123.100.
Next, configure eth0 as
DHCP Client and click Apply. Then power-cycle the SYMPL Fusion again.
Then configure
eth0 as Automatic DHCP Client or Server and click Apply. Power-cycle the device once more.
After approximately 60 seconds, devices connected to the network should automatically receive IP addresses from the DHCP server running on the SYMPL Fusion.